- Joined
- Jan 25, 2024
- Messages
- 3,676
- Points
- 38
- Age
- 38
- Location
- USA
- Website
- gameparadise.org
- Credits
- 65,616
For those wishing to get the Lilygo-T-Dongle-S3, for PS4 hacking, I have written software for it and published on github. In the release section I uploaded the bin firmware files so you can flash these with esptool if you don't know how to use Arduino, and install libraries etc. I don't think you need to even install python for the standalone version of esptool - but if you don't trust the precompiled exe files from that github page you can use python, see the readme in the realse page zip file for flashing info.
Github Page:
Removed until furthe notice
The button on the device has various functions:
1: Press and hold button - plug into your computer, this will let you flash firmware.
2: Short press - wake up from sleep mode.
3: Double press - wipe config files out if you get locked out of wifi or want to reset back to the default settings (hard reset mode).
4: Long press - reboot the dongle.
USB wait time after the glitch has commenced is set to 2 seconds - It works fine on 1.85 seconds, but stick to two seconds to prevent issues. The Latest goldhen will be pushed automatically,
LCD display: This shows you the MAC address of the dongle, your current IP that is assigned in either AP or WIFI mode, it will also show the SSID of the AP or WIFI netwrok you are connected to.
Auto shutdown into deepsleep is enabled by default and set to 10 minutes, however as soon as goldhen is injected, the dongle will go into deep sleep and turn the led and lcd screen off - if you want to wake up, just short press the button on the dongle.
Default mode is set to AP mode - wifi network to connect to is PS4-Hack, Ip address for configuring is shown on the dongle http://1.2.3.4/admin.html
Micro SD card support is not added to this, as it is very slow compared to using the flash memory, With the included firmware+partitons bin in the zip you will have around 12MB to put your payloads on, which is more that enough for all the payloads that are avalable for the PS4.
Enjoy!
***INCLUDED GOLDHEN is for FW9.0 - if you are using lower FW, you can upload goldhen via the web server and set your version via the config page***
Github Page:
Removed until furthe notice
The button on the device has various functions:
1: Press and hold button - plug into your computer, this will let you flash firmware.
2: Short press - wake up from sleep mode.
3: Double press - wipe config files out if you get locked out of wifi or want to reset back to the default settings (hard reset mode).
4: Long press - reboot the dongle.
USB wait time after the glitch has commenced is set to 2 seconds - It works fine on 1.85 seconds, but stick to two seconds to prevent issues. The Latest goldhen will be pushed automatically,
LCD display: This shows you the MAC address of the dongle, your current IP that is assigned in either AP or WIFI mode, it will also show the SSID of the AP or WIFI netwrok you are connected to.
Auto shutdown into deepsleep is enabled by default and set to 10 minutes, however as soon as goldhen is injected, the dongle will go into deep sleep and turn the led and lcd screen off - if you want to wake up, just short press the button on the dongle.
Default mode is set to AP mode - wifi network to connect to is PS4-Hack, Ip address for configuring is shown on the dongle http://1.2.3.4/admin.html
Micro SD card support is not added to this, as it is very slow compared to using the flash memory, With the included firmware+partitons bin in the zip you will have around 12MB to put your payloads on, which is more that enough for all the payloads that are avalable for the PS4.
Enjoy!
***INCLUDED GOLDHEN is for FW9.0 - if you are using lower FW, you can upload goldhen via the web server and set your version via the config page***
